This lighting system is developed by EastHobby for RC helicopters and air planes. Good for 7.4V - 11.1V Batteries. JST Plugs fitted. If you use dean (T) connector, you need to make some modification in order to use this product.

Instructions below are for our best seller - The Esky Honey Bee CP2 3D Helicopter.

1. Make holes in your helicopter or air plane canopy / body to fit the LED light holders

a) Drill a big hole for the Big LED light holder - make sure you drill a correct size

Install the holder to the hole you have drilled

Secure the holder

b) Drill 2 small holes for the small LED light holders

Install the small white color LED light on the tail of your helicopter or air plane

c) Organize the wiring.

2. Connection: Connect the battery to the control board of the LED light system and your helicopter or plane

Turn ON the switch to start

Overall View:

4 LED Lights installed on the Honey Bee ESky CP2 RC Helicopter (in dark)